13-Inch vs. 17-Inch DTF Gang Sheets: Which Should You Choose?

The best gang-sheet width is the one that fits your artwork efficiently. A wider roll is not automatically cheaper, and a narrower roll is not automatically easier.

At DTF Wholesale Canada, both apparel DTF options use a $10 minimum per gang sheet, while the linear-inch rates and available printable width differ.

Compare Actual Printable Widths and Current Rates

The builders currently use 12.25 inches of printable width on the 13-inch roll and 16.25 inches on the 17-inch roll. Both apply a $10.00 minimum per gang sheet. The example prices below use a 22-inch sheet length; tax and shipping are extra.

When a 13-Inch Sheet Makes Sense

Choose the 13-inch builder when your largest design fits comfortably within its printable area and your order consists mainly of smaller chest, sleeve, youth, or accessory graphics. The narrower format can be easy to cut and store.

When a 17-Inch Sheet Makes Sense

The 17-inch builder gives larger graphics and mixed-size orders more room to nest. It is often the better starting point for adult full fronts, full backs, or a combination of large graphics and small logos.

Compare the Finished Layout

Do not compare only the price per linear inch. Upload the same artwork to the appropriate builder and compare the required length, total cost, and cutting convenience. A wider sheet may reduce length enough to offset its higher linear-inch rate.

Respect the Printable Area

The named roll width includes production tolerances. The builder enforces the actual printable area automatically, so use its warnings and preview rather than assuming a design equal to the nominal roll width will fit.

Practical Takeaway

Start with the largest design. If it fits the 13-inch printable area, compare both layouts; if it does not, use the 17-inch builder. See the worked logo-capacity example and confirm every file against the order checklist.

Ready for the next step? build a 13-inch gang sheet.